MRA 2 - Motor belt drive
Application
The MRA 2 replaces the complete QAP assembly. Servo motors set new standards. Every drive belt is controlled, adjusted and monitored separately via the central terminal.
The MRA 2 can be used for all circular knitting machines. Set-up takes just a tenth of the previous time.
Main features
- Closer adherence to stitch size, not otherwise possible with conventional processes
- Improved fabric quality due to uniform yarn inlet rate for all machine series
- Greater productivity with lower costs thanks to shorter set-up times
MRA 2: The components
Servomotors:
These power the drive belts at exactly the speed required for the present yarn feed rate.
Operator panel:
Is used to enter all the installation and operating parameters.
Control unit:
This feeds the power supply to the servomotors and can power up to 6 servomotors.
Capacitors:
In the event of a mains power failure, the capacitors ensure that the system continues running.
Encoder:
The encoder detects cylinder movements and transmits the corresponding pulses to the control unit.
1. Servomotors
These power the drive belts at exactly the speed required for the present yarn feed rate.
2. Operator panel
Is used to enter all the installation and operating parameters.
3. Control unit
This feeds the power supply to the servomotors and can power up to 6 servomotors. The control unit stores data received from the operator panel and the encoder and transmits this data to the servomotors.
4. Capacitors
In the event of a mains power failure, the capacitors ensure that the system continues running until the machine has come to a complete standstill; this prevents yarn breakage.
5. Encoder
The encoder detects cylinder movements and transmits the corresponding pulses to the control unit.
Technische DatenTechnical data
Line voltage | 3 x 400 V AC, other voltages possible with upstream step-down transformer |
|---|---|
Line frequency | 45 – 66 Hz |
Power | 250 VA per servo motor |
Max. number of driven feeders | 60 MPF units per belt / servo motor |
Max. belt speed | 360 m/min (with 30-tooth drive pulley) |
Length of connecting cable between control unit and servo motor | 1,8 m or 3,0 m |
VariantenVersions
ZubehörAccessories
Servo motors
Used to drive belts according to specified yarn feed rate.
Operation terminal
Used to enter all parameters necessary for installation and operation.
Control unit
Used to supply power to the max. 6 servo motors. Data from operation terminal and encoder are saved and transmitted to servo motors.
Capacitors
Ensure with a mains power failure that the system continues running until the machine comes to a complete standstill, so preventing yarn breakage.
Encoder
Detects cylinder movements and transmits them to the control unit in the form of pulses.
DownloadsDownloads
VideosVideos
